Specifications of torque and torque of the Avanza engine K3 VE engine
Untuk menghindari kerusakan pada baut atau komponen yang dipasang pada mesin, setiap baut dan mur memiliki spesifikasi torsi dan momen kekencangan tersendiri yang diatur oleh masing-masing pembuat mobil. Secara spesifik, ukuran torsi dan momen kekencangan baut bisa anda temukan pada buku panduan service masing-masing kendaraan.
If the installation of these bolts or nuts does not follow the appropriate rules and specifications for tightness, there will be many negative impacts that can result in losses, such as broken bolts (needs to be dismantled and repaired), sleg bolts, until the bolts loosen and come off after the machine is used. That's why every bolt and nut in the machine must have a size of torque and moment of tightness.
If in the previous post Ombro has shared related information Specifications and size of the T120SS engine bolt tension type 4G15 So, in this article, Ombro will again share information about torque specifications and torque specifications for the Avanza K3 VE engine. Below are the torque specifications and torque specifications for the Avanza K3 VE engine
The table above uses unit values in the form of Kilograms per meter (kgm)
Read also:
Especially for cylinder head bolts and piston handlebar nuts, do the tightening gradually until the size of the tightness specifications specified in the table above (for example for cylinder head bolts it is 3.2 to 3.4 kgm). After that, add a 90 degree turn (plus minus 10 degrees) to complete the tightening.
Demikianlah artikel tentang spesifikasi torsi dan momen baut mesin Avanza mesin K3 VE yang bisa ombro sampaikan, semoga bisa bermanfaat.
If the installation of these bolts or nuts does not follow the appropriate rules and specifications for tightness, there will be many negative impacts that can result in losses, such as broken bolts (needs to be dismantled and repaired), sleg bolts, until the bolts loosen and come off after the machine is used. That's why every bolt and nut in the machine must have a size of torque and moment of tightness.
If in the previous post Ombro has shared related information Specifications and size of the T120SS engine bolt tension type 4G15 So, in this article, Ombro will again share information about torque specifications and torque specifications for the Avanza K3 VE engine. Below are the torque specifications and torque specifications for the Avanza K3 VE engine
Specifications of torque and torque of the Avanza engine K3 VE engine
| Component | Torque (kgf-m) | Remarks |
|---|---|---|
| Cylinder head x Ignition coil | 0.6 - 0.9 | |
| Cylinder head x Spark plug | 1.5 - 2.2 | |
| Cylinder head x Cylinder head cover | 0.7 - 1.1 | Cap nuts |
| 0.9 - 1.3 | Nut | |
| Cylinder head x Fuel delivery pipe | 1.7 - 2.6 | |
| Cylinder head x Intake manifold | 1.6 - 2.3 | |
| Cylinder head x Exhaust manifold | 2.1 - 2.9 | M101, M201, J102 series |
| 2.6 - 3.6 | Bolt S221 series | |
| Camshaft cap No. 1, No. 2 (camshaft cap bolt) | 1.1 - 1.5 | |
| Water pump pulley x Water pump | 0.8 - 1.5 | |
| DVVT controller x Intake camshaft | 4.1 - 5.5 | |
| Ignitor assy x Ignition coil cover | 0.5 - 1.0 | S221 series |
| Throttle body x Intake manifold | 0.5 - 1.0 | S221 series |
| Exhaust manifold x Oxygen sensor | 2.9 - 3.9 | |
| Exhaust manifold x Exhaust manifold cover | 0.5 - 1.0 | M101, M201, J102 series |
| Exhaust manifold x Exhaust manifold stay | 2.0 - 3.1 | S221 series |
| 3.3 - 4.9 | Nut S221 series | |
| Cylinder head x Water inlet | 0.7 - 1.1 | M101, M201, J102 series |
| Cylinder head x Cam angle sensor | 0.5 - 1.0 | |
| Cylinder head x Engine coolant temperature sensor | 1.6 - 2.4 | M101, M201, J102 series |
| Cylinder head x Chain tensioner | 0.7 - 1.1 | |
| Cylinder head x Ignitor bracket | 0.5 - 1.0 | M101, M201, J102 series |
| Cylinder head x Throttle body | 0.5 - 1.0 | M101, M201, J102 series |
| Throttle body x Throttle body bracket | 1.1 - 2.6 | M101, M201, J102 series |
| 1.7 - 2.6 | S221 series | |
| Cylinder block x Water inlet pipe | 0.6 - 1.2 | S221 series |
| Cylinder block x Oil filter bracket | 0.6 - 1.1 | M101, M201, J102 series |
| Cylinder block x Chain arm | 1.6 - 2.3 | |
| Cylinder block x Chain guide | 0.5 - 1.0 | |
| Cylinder block x Chain guide No. 2 | 0.5 - 1.0 | |
| Cylinder block x Water pump | 0.7 - 1.1 | |
| Cylinder block x Chain oil nozzle | 0.5 - 1.0 | |
| Cylinder block x Oil pressure switch | 1.1 - 2.0 | |
| Cylinder block x DVVT oil filter | 1.7 - 3.3 | |
| Cylinder block x Chain cover | 1.5 - 2.2 | M8 x 1.25 |
| 0.7 - 1.1 | M6 x 1.0 | |
| Cylinder block x Cylinder head (cylinder head bolt) | 3.2 to 3.4 + 90˚ | |
| Cylinder block x Rear oil seal retainer | 0.7 - 1.0 | |
| Cylinder block x Rear end plate | 0.5 - 1.0 | |
| Cylinder block x Oil pan | 0.6 - 1.1 | M6 x 1.0 |
| 3.0 - 5.6 | M10 x 1.25 | |
| Cylinder block x Oil pump | 0.7 - 1.1 | |
| Cylinder block x Knock sensor | 3.6 - 5.4 | Except European specifications |
| Cylinder block x Oil strainer | 0.6 - 1.1 | M101, M201 series |
| Connecting rod cap nut bolt | 2.0 to 2.5 + 90˚ | |
| Crankshaft bearing cap bolt | 5.4 - 6.6 | |
| Crankshaft pulley set bolt | 12.2 - 14.3 | |
| Crankshaft x Flywheel (flywheel bolt) | 7.5 - 8.4 | |
| Chain x Idler pulley | 3.6 - 5.3 | |
| Chain cover x Crank angle sensor | 0.5 - 1.0 | |
| Chain cover x Oil control valve | 0.5 - 1.0 | |
| Oil level gauge bracket x Intake manifold | 0.6 - 1.1 | J102 series |
| Water inlet x Radiator thermo control switch | 3.1 - 4.1 | M101, M201, J102 series |
| Water bypass outlet x Radiator thermo control switch | 2.0 - 3.0 | S221 series |
| Water bypass outlet x Engine coolant temperature sensor | 1.6 - 2.4 | S221 series |
| Oil pan x Oil strainer | 0.6 - 1.1 | J102, S221 series |
| Oil pan drain plug (engine oil drain bolt) | 2.4 - 3.6 |
Read also:
- How to manually scan avanza engine K3VE
- List of DTC avanza engine K3VE codes
- Specifications of car maintenance avanza model year 2011-2014
Especially for cylinder head bolts and piston handlebar nuts, do the tightening gradually until the size of the tightness specifications specified in the table above (for example for cylinder head bolts it is 3.2 to 3.4 kgm). After that, add a 90 degree turn (plus minus 10 degrees) to complete the tightening.
Demikianlah artikel tentang spesifikasi torsi dan momen baut mesin Avanza mesin K3 VE yang bisa ombro sampaikan, semoga bisa bermanfaat.
